GAYLASTIC® primer is produced out of blown grade bitumen and when applied to concrete from an effective impervious membrane possessing mass resistant to water solutions of non- oxidizing acids, salts and alkalis. GAYLASTIC® PRIMER gives better resistance acid and alkali vaporous, fumes etc. on structure machineries, concrete etc. PREPARATION OF CONCRETE SURFACE Concrete tanks manholes, floors, RCC Beam Column etc., to which GAYLASTIC® Primer is to be applied must be given sand finish and is produced by one pass with a steel trowel and all loose particles and dust brushed from the surface before the use of GAYLASTIC® Primer. The primer should not be applied on green concrete (wet). APPLICATION Please make sure that the surface is free from cracks grease dust and all foreign materials. GAYLASTIC® primer is applied with a brush and allowed to dry at least 2 hours for each cost. If the temperature is above 70°F the primer will become tack free in a shorter time. WARNING If you find GAYLASTIC® primer too viscous for application, thin it with turpentine or white petrol. In any circumstance do not add kerosene or diesel oil. GAYLSTIC® primer contains a volatile solvent, so keep sparks and open fire away from it. 04Kgs. of GAYLASTIC® primer is sufficient to cover 100 sq. ft. Area (Coverage may veary upon quality of surface). Tools, brushed hand etc. can be cleaned by kerosene or petrol. Materials : OurPacking GAYLASTIC® Primer: 20/200Ltr. pails Note : This leaflet is for reference and dose not give description of goods Handling Precautions Avoid direct contact with skin, it is essential to wear hand gloves and gum boots. While GAYATRI ANTICORROSIVE LINING strives to ensure that any advice, information or recommendation given are appropriate and correct, it cannot accept any liability directly or indirectly arising out of the use of the product, since the method and place of application of the products are beyond our control. IF ANY QUERY CONTACT US ON: Phone :- +91 7567772229 Email :- gayatriacidproof2709@gmail.com